Which Timber to Buy? Best Wood by Project | Treecycling UK

Which Timber Should I Buy? A Project-by-Project Guide

The honest answer is that it depends on what you're making. But here's where we'd start. For carving, lime. For chopping boards, sycamore. For window sills, oak. For bar tops, worktops and tables, a big oak slab. Then we'd look at the individual piece, because every board has its own character.

We're Treecycling UK, a timber yard in Huntingfield, Suffolk. All our wood comes from local trees, so no two pieces are the same. Here's how to match timber to your project.

Which Timber for Which Project?

Project Where we'd start
Carving Lime
Chopping boards Sycamore
Window sills Oak
Bar tops, worktops and table tops A large oak slab
Shelves and mantels Oak shelving and mantel boards
Coffee tables and resin projects Yew slabs and blanks
Woodturning Turning blanks, graded A to C

This is a starting point, not a rule. Plenty of other woods will do the job, and the right piece depends on the project.

What Timber Is Best for Carving?

Lime is a good choice for carving. It's one of the woods we're asked for most by carvers. We cut lime blocks and planks in a range of sizes, so you can choose a piece to suit what you're carving. Browse our lime wood.

What Timber Is Best for a Chopping Board?

Sycamore is a good choice for chopping boards. If you'd like to make your own, tell us the size you're after and we'll help you pick a piece.

What Timber Is Best for Window Sills?

Oak is good for window sills. We have oak sills in a range of sizes in our window sills collection.

What Timber Is Best for Bar Tops, Worktops and Tables?

For these we'd look at a large oak slab. People usually buy big slabs for bar tops, worktops, or to make their own tables. If you're going down this route, read our guide on what to check before buying a big oak slab. We also stock yew and other species, so see our timber slabs.

How Do I Check the Timber Is Ready to Use?

Whatever you buy, don't buy green wood. Invest in a half-decent moisture meter:

  • 8 to 12% is an acceptable reading for a project
  • Above 16%, it's probably best left alone, as it's likely to shrink and twist as it dries

How Do I Choose the Right Piece?

Every piece of wood has its own characteristics that may or may not suit your purpose. Tell us what you're making, roughly how big it needs to be, where it's going and the look you're after, and we'll advise where to start. We'd rather point you to the right piece than sell you the wrong one.

You can also visit the yard by appointment or order online with UK delivery.

Ready to start your project?

Explore our premium wood products perfect for your next creation.

Shop Now

Share this article

Comments (0)

Leave a comment